When using concrete pump pipes, the source of concrete should be considered. If it is on-site mixing and concrete, first determine the position of the mixing machine based on the site and the feeding method of the mixing machine, and then determine the position of the concrete pump based on the discharge height of the mixing machine and the requirements for wear-resistant pump pipe delivery and connection. If it is commercial concrete, the mixing and transportation vehicles can install wear-resistant pump pipes on site for feeding, as long as it is convenient to connect and feed. Firstly, place the concrete pump on a solid cement ground or stone pier, maintain the level, and lock the positioning pins and safety pins of the four legs of the pump to make the tire detach from the ground or remove the tire. Under normal circumstances, it is necessary to raise the hopper of the wear-resistant pump tube machine by about 20CM to increase the hopper volume and ensure that the concrete does not flow out. Because forced mixing and machine unloading are best done in one go, so that the concrete flowing into the hopper has a uniform specific force. If unloading is done in stages. Heyu Heavy Industry | Filling Pump | Filling Industrial Pump | Industrial Filling Pump | Paste Filling Industrial Pump | Paste Filling Industrial Pump | Mine Tailings Filling Pump | S Valve Piston Filling Industrial Pump | Cone Valve Piston Industrial Pump | HGBS Filling Industrial Pump | Deep Cone Thickener | Deep Cone Paste Thickener | Efficient Mixing Barrel | High Concentration Mixing Barrel | Tailings Filling System | Paste Filling System | Mine Tailings Paste Filling System | Mine Tailings Cement Filling System| 和宇重工|充填泵|充填工业泵|工业充填泵|膏体充填工业泵|膏体工业充填泵|矿山尾砂充填泵|矿山尾砂工业泵|S阀活塞式充填工业泵|锥阀活塞式工业泵|HGBS充填工业泵|深锥浓密机|深锥膏体浓密机|高效搅拌桶|高浓度搅拌桶|尾砂充填系统|膏体充填系统|矿山尾砂膏体充填系统|矿山全尾砂胶结充填系统|